I've seen a number of YouTube videos where people have replaced their stock UPair One motors and decided against unsoldering the wires from the flight controller board but cut the wires to the motors and spliced them back together. Some use crimp connectors and one person I remember used crimped on male and female spade terminals insulated with duct tape! That was the video with the ESC fire on in flight.
I've replaced all of my stock motors with Racerstar 2212's and opted to use these quick-disconnect terminals. They work very well and with the proper heat-shrink tubing applied, they'll protect against shorting out your ESC's.
These connectors are wonderful for easily swapping out your quad's motors. Here is a link on Amazon:
https://www.amazon.com/gp/product/B0113N3D42/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
No comments:
Post a Comment